Before we were informed of the Theatre we were working with I was hoping to build a large temple at the back of the stage. Due to Margate Theatre Royal being quite small I was forced to revise the size of the temple. I reduced it in size from having four columns on each side to two.
 |
| Smaller Temple |
 |
| Smaller Temple Dimensions |
When I started experimenting with making the columns for the temple I found that they were too small to be made easily with the shaft of the column being less than 20mm. Once again I revised the design of the Temple and adjusted some of the measurements so that the columns could be made slightly bigger and simpler to mould.
 |
| Smaller Temple Revised Column Dimensions |
 |
| Revised Smaller Temple |
When I started experimenting with making the columns for the temple I found that they were too small to be made easily with the shaft of the column being less than 20mm. Once again I revised the design of the Temple and adjusted some of the measurements so that the columns could be made slightly bigger and simpler to mould.
No comments:
Post a Comment